Current File : //lib/dracut/modules.d/35network-legacy/parse-ip-opts.sh
#!/bin/sh
#
# Format:
# ip=[dhcp|on|any]
#
# ip=<interface>:[dhcp|on|any][:[<mtu>][:<macaddr>]]
#
# ip=<client-IP-number>:<server-IP-number>:<gateway-IP-number>:<netmask>:<client-hostname>:<interface>:{dhcp|on|any|none|off}[:[<mtu>][:<macaddr>]]
#
# When supplying more than only ip= line, <interface> is mandatory and
# bootdev= must contain the name of the primary interface to use for
# routing,dns,dhcp-options,etc.
#
command -v getarg >/dev/null || . /lib/dracut-lib.sh
if [ -n "$netroot" ] && [ -z "$(getarg ip=)" ] && [ -z "$(getarg BOOTIF=)" ]; then
# No ip= argument(s) for netroot provided, defaulting to DHCP
return;
fi
# Count ip= lines to decide whether we need bootdev= or not
if [ -z "$NEEDBOOTDEV" ] ; then
count=0
for p in $(getargs ip=); do
case "$p" in
ibft)
continue;;
esac
count=$(( $count + 1 ))
done
[ $count -gt 1 ] && NEEDBOOTDEV=1
fi
unset count
# If needed, check if bootdev= contains anything usable
BOOTDEV=$(getarg bootdev=)
if [ -n "$NEEDBOOTDEV" ] && getargbool 1 rd.neednet; then
#[ -z "$BOOTDEV" ] && warn "Please supply bootdev argument for multiple ip= lines"
echo "rd.neednet=1" > /etc/cmdline.d/dracut-neednet.conf
info "Multiple ip= arguments: assuming rd.neednet=1"
else
unset NEEDBOOTDEV
fi
# Check ip= lines
# XXX Would be nice if we could errorcheck ip addresses here as well
for p in $(getargs ip=); do
ip_to_var $p
# make first device specified the BOOTDEV
if [ -n "$NEEDBOOTDEV" ] && [ -z "$BOOTDEV" ] && [ -n "$dev" ]; then
BOOTDEV="$dev"
info "Setting bootdev to '$BOOTDEV'"
fi
# skip ibft since we did it above
[ "$autoconf" = "ibft" ] && continue
# Empty autoconf defaults to 'dhcp'
if [ -z "$autoconf" ] ; then
warn "Empty autoconf values default to dhcp"
autoconf="dhcp"
fi
# Error checking for autoconf in combination with other values
for autoopt in $(str_replace "$autoconf" "," " "); do
case $autoopt in
error) die "Error parsing option 'ip=$p'";;
bootp|rarp|both) die "Sorry, ip=$autoopt is currenty unsupported";;
none|off)
[ -z "$ip" ] && \
die "For argument 'ip=$p'\nValue '$autoopt' without static configuration does not make sense"
[ -z "$mask" ] && \
die "Sorry, automatic calculation of netmask is not yet supported"
;;
auto6);;
either6);;
dhcp|dhcp6|on|any) \
[ -n "$NEEDBOOTDEV" ] && [ -z "$dev" ] && \
die "Sorry, 'ip=$p' does not make sense for multiple interface configurations"
[ -n "$ip" ] && \
die "For argument 'ip=$p'\nSorry, setting client-ip does not make sense for '$autoopt'"
;;
*) die "For argument 'ip=$p'\nSorry, unknown value '$autoopt'";;
esac
done
if [ -n "$dev" ] ; then
# We don't like duplicate device configs
if [ -n "$IFACES" ] ; then
for i in $IFACES ; do
[ "$dev" = "$i" ] && die "For argument 'ip=$p'\nDuplication configurations for '$dev'"
done
fi
# IFACES list for later use
IFACES="$IFACES $dev"
fi
# Do we need to check for specific options?
if [ -n "$NEEDDHCP" ] || [ -n "$DHCPORSERVER" ] ; then
# Correct device? (Empty is ok as well)
[ "$dev" = "$BOOTDEV" ] || continue
# Server-ip is there?
[ -n "$DHCPORSERVER" ] && [ -n "$srv" ] && continue
# dhcp? (It's simpler to check for a set ip. Checks above ensure that if
# ip is there, we're static
[ -z "$ip" ] && continue
# Not good!
die "Server-ip or dhcp for netboot needed, but current arguments say otherwise"
fi
if str_starts "$dev" "enx" && [ ${#dev} -eq 15 ]; then
printf -- "ifname=%s:%s:%s:%s:%s:%s:%s\n" \
"$dev" \
"${dev:3:2}" \
"${dev:5:2}" \
"${dev:7:2}" \
"${dev:9:2}" \
"${dev:11:2}" \
"${dev:13:2}" >> /etc/cmdline.d/80-enx.conf
fi
done
# put BOOTIF in IFACES to make sure it comes up
if getargbool 1 "rd.bootif" && BOOTIF="$(getarg BOOTIF=)"; then
BOOTDEV=$(fix_bootif $BOOTIF)
IFACES="$BOOTDEV $IFACES"
fi
# This ensures that BOOTDEV is always first in IFACES
if [ -n "$BOOTDEV" ] && [ -n "$IFACES" ] ; then
IFACES="${IFACES%$BOOTDEV*} ${IFACES#*$BOOTDEV}"
IFACES="$BOOTDEV $IFACES"
fi
# Store BOOTDEV and IFACES for later use
[ -n "$BOOTDEV" ] && echo $BOOTDEV > /tmp/net.bootdev
[ -n "$IFACES" ] && echo $IFACES > /tmp/net.ifaces
Mini Shell