#!/bin/sh
#
# Kdump common variables and functions
#
DEFAULT_PATH="/var/crash/"
FENCE_KDUMP_CONFIG_FILE="/etc/sysconfig/fence_kdump"
FENCE_KDUMP_SEND="/usr/libexec/fence_kdump_send"
FADUMP_ENABLED_SYS_NODE="/sys/kernel/fadump_enabled"
is_fadump_capable()
{
# Check if firmware-assisted dump is enabled
# if no, fallback to kdump check
if [ -f $FADUMP_ENABLED_SYS_NODE ]; then
rc=`cat $FADUMP_ENABLED_SYS_NODE`
[ $rc -eq 1 ] && return 0
fi
return 1
}
perror_exit() {
echo $@ >&2
exit 1
}
perror() {
echo $@ >&2
}
is_ssh_dump_target()
{
grep -q "^ssh[[:blank:]].*@" /etc/kdump.conf
}
is_nfs_dump_target()
{
grep -q "^nfs" /etc/kdump.conf || \
[[ $(get_dracut_args_fstype "$(grep "^dracut_args .*\-\-mount" /etc/kdump.conf)") = nfs* ]]
}
is_raw_dump_target()
{
grep -q "^raw" /etc/kdump.conf
}
is_fs_type_nfs()
{
local _fstype=$1
[ $_fstype = "nfs" ] || [ $_fstype = "nfs4" ] && return 0
return 1
}
is_fs_dump_target()
{
egrep -q "^ext[234]|^xfs|^btrfs|^minix" /etc/kdump.conf
}
strip_comments()
{
echo $@ | sed -e 's/\(.*\)#.*/\1/'
}
# Read from kdump config file stripping all comments
read_strip_comments()
{
# strip heading spaces, and print any content starting with
# neither space or #, and strip everything after #
sed -n -e "s/^\s*\([^# \t][^#]\+\).*/\1/gp" $1
}
# Check if fence kdump is configured in Pacemaker cluster
is_pcs_fence_kdump()
{
# no pcs or fence_kdump_send executables installed?
type -P pcs > /dev/null || return 1
[ -x $FENCE_KDUMP_SEND ] || return 1
# fence kdump not configured?
(pcs cluster cib | grep 'type="fence_kdump"') &> /dev/null || return 1
}
# Check if fence_kdump is configured using kdump options
is_generic_fence_kdump()
{
[ -x $FENCE_KDUMP_SEND ] || return 1
grep -q "^fence_kdump_nodes" /etc/kdump.conf
}
to_dev_name() {
local dev="${1//\"/}"
case "$dev" in
UUID=*)
dev=`blkid -U "${dev#UUID=}"`
;;
LABEL=*)
dev=`blkid -L "${dev#LABEL=}"`
;;
esac
echo $dev
}
is_user_configured_dump_target()
{
return $(is_mount_in_dracut_args || is_ssh_dump_target || is_nfs_dump_target || \
is_raw_dump_target || is_fs_dump_target)
}
get_user_configured_dump_disk()
{
local _target
_target=$(egrep "^ext[234]|^xfs|^btrfs|^minix|^raw" /etc/kdump.conf 2>/dev/null |awk '{print $2}')
[ -n "$_target" ] && echo $_target && return
_target=$(get_dracut_args_target "$(grep "^dracut_args .*\-\-mount" /etc/kdump.conf)")
[ -b "$_target" ] && echo $_target
}
get_root_fs_device()
{
local _target
_target=$(findmnt -k -f -n -o SOURCE /)
[ -n "$_target" ] && echo $_target
return
}
get_save_path()
{
local _save_path=$(grep "^path" /etc/kdump.conf|awk '{print $2}')
if [ -z "$_save_path" ]; then
_save_path=$DEFAULT_PATH
fi
echo $_save_path
}
get_block_dump_target()
{
local _target _path
if is_ssh_dump_target || is_nfs_dump_target; then
return
fi
_target=$(get_user_configured_dump_disk)
[ -n "$_target" ] && echo $(to_dev_name $_target) && return
# Get block device name from local save path
_path=$(get_save_path)
_target=$(get_target_from_path $_path)
[ -b "$_target" ] && echo $(to_dev_name $_target)
}
is_dump_to_rootfs()
{
grep -E "^(failure_action|default)[[:space:]]dump_to_rootfs" /etc/kdump.conf >/dev/null
}
get_failure_action_target()
{
local _target
if is_dump_to_rootfs; then
# Get rootfs device name
_target=$(get_root_fs_device)
[ -b "$_target" ] && echo $(to_dev_name $_target) && return
# Then, must be nfs root
echo "nfs"
fi
}
# Get kdump targets(including root in case of dump_to_rootfs).
get_kdump_targets()
{
local _target _root
local kdump_targets
_target=$(get_block_dump_target)
if [ -n "$_target" ]; then
kdump_targets=$_target
elif is_ssh_dump_target; then
kdump_targets="ssh"
else
kdump_targets="nfs"
fi
# Add the root device if dump_to_rootfs is specified.
_root=$(get_failure_action_target)
if [ -n "$_root" -a "$kdump_targets" != "$_root" ]; then
kdump_targets="$kdump_targets $_root"
fi
echo "$kdump_targets"
}
# findmnt uses the option "-v, --nofsroot" to exclusive the [/dir]
# in the SOURCE column for bind-mounts, then if $_mntpoint equals to
# $_mntpoint_nofsroot, the mountpoint is not bind mounted directory.
is_bind_mount()
{
local _mntpoint=$(findmnt $1 | tail -n 1 | awk '{print $2}')
local _mntpoint_nofsroot=$(findmnt -v $1 | tail -n 1 | awk '{print $2}')
if [[ $_mntpoint = $_mntpoint_nofsroot ]]; then
return 1
else
return 0
fi
}
# Below is just an example for mount info
# /dev/mapper/atomicos-root[/ostree/deploy/rhel-atomic-host/var], if the
# directory is bind mounted. The former part represents the device path, rest
# part is the bind mounted directory which quotes by bracket "[]".
get_bind_mount_directory()
{
local _mntpoint=$(findmnt $1 | tail -n 1 | awk '{print $2}')
local _mntpoint_nofsroot=$(findmnt -v $1 | tail -n 1 | awk '{print $2}')
_mntpoint=${_mntpoint#*$_mntpoint_nofsroot}
_mntpoint=${_mntpoint#[}
_mntpoint=${_mntpoint%]}
echo $_mntpoint
}
get_mntpoint_from_path()
{
echo $(df $1 | tail -1 | awk '{print $NF}')
}
get_target_from_path()
{
local _target
_target=$(df $1 2>/dev/null | tail -1 | awk '{print $1}')
[[ "$_target" == "/dev/root" ]] && [[ ! -e /dev/root ]] && _target=$(get_root_fs_device)
echo $_target
}
get_fs_type_from_target()
{
echo $(findmnt -k -f -n -r -o FSTYPE $1)
}
# input: device path
# output: the general mount point
# find the general mount point, not the bind mounted point in atomic
# As general system, Use the previous code
#
# ERROR and EXIT:
# the device can be umounted the general mount point, if one of the mount point is bind mounted
# For example:
# mount /dev/sda /mnt/
# mount -o bind /mnt/var /var
# umount /mnt
get_mntpoint_from_target()
{
if is_atomic; then
for _mnt in $(findmnt -k -n -r -o TARGET $1)
do
if ! is_bind_mount $_mnt; then
echo $_mnt
return
fi
done
echo "Mount $1 firstly, without the bind mode" >&2
exit 1
else
echo $(findmnt -k -f -n -r -o TARGET $1)
fi
}
# get_option_value <option_name>
# retrieves value of option defined in kdump.conf
get_option_value() {
echo $(strip_comments `grep "^$1[[:space:]]\+" /etc/kdump.conf | tail -1 | cut -d\ -f2-`)
}
#This function compose a absolute path with the mount
#point and the relative $SAVE_PATH.
#target is passed in as argument, could be UUID, LABEL,
#block device or even nfs server export of the form of
#"my.server.com:/tmp/export"?
#And possibly this could be used for both default case
#as well as when dump taret is specified. When dump
#target is not specified, then $target would be null.
make_absolute_save_path()
{
local _target=$1
local _mnt
[ -n $_target ] && _mnt=$(get_mntpoint_from_target $1)
_mnt="${_mnt}/$SAVE_PATH"
# strip the duplicated "/"
echo "$_mnt" | tr -s /
}
check_save_path_fs()
{
local _path=$1
if [ ! -d $_path ]; then
perror_exit "Dump path $_path does not exist."
fi
}
is_atomic()
{
grep -q "ostree" /proc/cmdline
}
# fixme, try the best to decide whether the ipv6 addr is allocated by slaac or dhcp6
is_ipv6_auto()
{
local _netdev=$1
local _auto=$(cat /proc/sys/net/ipv6/conf/$_netdev/autoconf)
if [ $_auto -eq 1 ]; then
return 0
else
return 1
fi
}
is_ipv6_address()
{
echo $1 | grep -q ":"
}
# get ip address or hostname from nfs/ssh config value
get_remote_host()
{
local _config_val=$1
# ipv6 address in kdump.conf is around with "[]",
# factor out the ipv6 address
_config_val=${_config_val#*@}
_config_val=${_config_val%:/*}
_config_val=${_config_val#[}
_config_val=${_config_val%]}
echo $_config_val
}
is_hostname()
{
local _hostname=`echo $1 | grep ":"`
if [ -n "$_hostname" ]; then
return 1
fi
echo $1 | grep -q "[a-zA-Z]"
}
# Copied from "/etc/sysconfig/network-scripts/network-functions"
get_hwaddr()
{
if [ -f "/sys/class/net/${1}/address" ]; then
awk '{ print toupper($0) }' < /sys/class/net/${1}/address
elif [ -d "/sys/class/net/${1}" ]; then
LC_ALL= LANG= ip -o link show ${1} 2>/dev/null | \
awk '{ print toupper(gensub(/.*link\/[^ ]* ([[:alnum:]:]*).*/,
"\\1", 1)); }'
fi
}
get_ifcfg_by_device()
{
grep -E -i -l "^[[:space:]]*DEVICE=\"*${1}\"*[[:space:]]*$" \
/etc/sysconfig/network-scripts/ifcfg-* 2>/dev/null | head -1
}
get_ifcfg_by_hwaddr()
{
grep -E -i -l "^[[:space:]]*HWADDR=\"*${1}\"*[[:space:]]*$" \
/etc/sysconfig/network-scripts/ifcfg-* 2>/dev/null | head -1
}
get_ifcfg_by_uuid()
{
grep -E -i -l "^[[:space:]]*UUID=\"*${1}\"*[[:space:]]*$" \
/etc/sysconfig/network-scripts/ifcfg-* 2>/dev/null | head -1
}
get_ifcfg_by_name()
{
grep -E -i -l "^[[:space:]]*NAME=\"*${1}\"*[[:space:]]*$" \
/etc/sysconfig/network-scripts/ifcfg-* 2>/dev/null | head -1
}
is_nm_running()
{
[ "$(LANG=C nmcli -t --fields running general status 2>/dev/null)" = "running" ]
}
is_nm_handling()
{
LANG=C nmcli -t --fields device,state dev status 2>/dev/null \
| grep -q "^\(${1}:connected\)\|\(${1}:connecting.*\)$"
}
# $1: netdev name
get_ifcfg_nmcli()
{
local nm_uuid nm_name
local ifcfg_file
# Get the active nmcli config name of $1
if is_nm_running && is_nm_handling "${1}" ; then
# The configuration "uuid" and "name" generated by nm is wrote to
# the ifcfg file as "UUID=<nm_uuid>" and "NAME=<nm_name>".
nm_uuid=$(LANG=C nmcli -t --fields uuid,device c show --active 2>/dev/null \
| grep "${1}" | head -1 | cut -d':' -f1)
nm_name=$(LANG=C nmcli -t --fields name,device c show --active 2>/dev/null \
| grep "${1}" | head -1 | cut -d':' -f1)
ifcfg_file=$(get_ifcfg_by_uuid "${nm_uuid}")
[ -z "${ifcfg_file}" ] && ifcfg_file=$(get_ifcfg_by_name "${nm_name}")
fi
echo -n "${ifcfg_file}"
}
# $1: netdev name
get_ifcfg_legacy()
{
local ifcfg_file
ifcfg_file="/etc/sysconfig/network-scripts/ifcfg-${1}"
[ -f "${ifcfg_file}" ] && echo -n "${ifcfg_file}" && return
ifcfg_file=$(get_ifcfg_by_name "${1}")
[ -f "${ifcfg_file}" ] && echo -n "${ifcfg_file}" && return
local hwaddr=$(get_hwaddr "${1}")
if [ -n "$hwaddr" ]; then
ifcfg_file=$(get_ifcfg_by_hwaddr "${hwaddr}")
[ -f "${ifcfg_file}" ] && echo -n "${ifcfg_file}" && return
fi
ifcfg_file=$(get_ifcfg_by_device "${1}")
echo -n "${ifcfg_file}"
}
# $1: netdev name
# Return the ifcfg file whole name(including the path) of $1 if any.
get_ifcfg_filename() {
local ifcfg_file
ifcfg_file=$(get_ifcfg_nmcli "${1}")
if [ -z "${ifcfg_file}" ]; then
ifcfg_file=$(get_ifcfg_legacy "${1}")
fi
echo -n "${ifcfg_file}"
}
# returns 0 when omission of watchdog module is desired in dracut_args
# returns 1 otherwise
is_wdt_mod_omitted() {
local dracut_args
local ret=1
dracut_args=$(grep "^dracut_args" /etc/kdump.conf)
[[ -z $dracut_args ]] && return $ret
eval set -- $dracut_args
while :; do
[[ -z $1 ]] && break
case $1 in
-o|--omit)
echo $2 | grep -qw "watchdog"
[[ $? == 0 ]] && ret=0
break
esac
shift
done
return $ret
}
# If "dracut_args" contains "--mount" information, use it
# directly without any check(users are expected to ensure
# its correctness).
is_mount_in_dracut_args()
{
grep -q "^dracut_args .*\-\-mount" /etc/kdump.conf
}
# If $1 contains dracut_args "--mount", return <filesystem type>
get_dracut_args_fstype()
{
echo $1 | grep "\-\-mount" | sed "s/.*--mount .\(.*\)/\1/" | cut -d' ' -f3
}
# If $1 contains dracut_args "--mount", return <device>
get_dracut_args_target()
{
echo $1 | grep "\-\-mount" | sed "s/.*--mount .\(.*\)/\1/" | cut -d' ' -f1
}
check_crash_mem_reserved()
{
local mem_reserved
mem_reserved=$(cat /sys/kernel/kexec_crash_size)
if [ $mem_reserved -eq 0 ]; then
echo "No memory reserved for crash kernel"
return 1
fi
return 0
}
check_kdump_feasibility()
{
if [ ! -e /sys/kernel/kexec_crash_loaded ]; then
echo "Kdump is not supported on this kernel"
return 1
fi
check_crash_mem_reserved
return $?
}
check_current_kdump_status()
{
if [ ! -f /sys/kernel/kexec_crash_loaded ];then
echo "Perhaps CONFIG_CRASH_DUMP is not enabled in kernel"
return 1
fi
rc=`cat /sys/kernel/kexec_crash_loaded`
if [ $rc == 1 ]; then
return 0
else
return 1
fi
}
# remove_cmdline_param <kernel cmdline> <param1> [<param2>] ... [<paramN>]
# Remove a list of kernel parameters from a given kernel cmdline and print the result.
# For each "arg" in the removing params list, "arg" and "arg=xxx" will be removed if exists.
remove_cmdline_param()
{
local cmdline=$1
shift
for arg in $@; do
cmdline=`echo $cmdline | \
sed -e "s/\b$arg=[^ ]*//g" \
-e "s/^$arg\b//g" \
-e "s/[[:space:]]$arg\b//g" \
-e "s/\s\+/ /g"`
done
echo $cmdline
}
#
# This function returns the "apicid" of the boot
# cpu (cpu 0) if present.
#
get_bootcpu_apicid()
{
awk ' \
BEGIN { CPU = "-1"; } \
$1=="processor" && $2==":" { CPU = $NF; } \
CPU=="0" && /^apicid/ { print $NF; } \
' \
/proc/cpuinfo
}
#
# append_cmdline <kernel cmdline> <parameter name> <parameter value>
# This function appends argument "$2=$3" to string ($1) if not already present.
#
append_cmdline()
{
local cmdline=$1
local newstr=${cmdline/$2/""}
# unchanged str implies argument wasn't there
if [ "$cmdline" == "$newstr" ]; then
cmdline="${cmdline} ${2}=${3}"
fi
echo $cmdline
}
# This function check iomem and determines if we have more than
# 4GB of ram available. Returns 1 if we do, 0 if we dont
need_64bit_headers()
{
return `tail -n 1 /proc/iomem | awk '{ split ($1, r, "-"); \
print (strtonum("0x" r[2]) > strtonum("0xffffffff")); }'`
}
# Check if secure boot is being enforced.
#
# Per Peter Jones, we need check efivar SecureBoot-$(the UUID) and
# SetupMode-$(the UUID), they are both 5 bytes binary data. The first four
# bytes are the attributes associated with the variable and can safely be
# ignored, the last bytes are one-byte true-or-false variables. If SecureBoot
# is 1 and SetupMode is 0, then secure boot is being enforced.
#
# Assume efivars is mounted at /sys/firmware/efi/efivars.
is_secure_boot_enforced()
{
local secure_boot_file setup_mode_file
local secure_boot_byte setup_mode_byte
secure_boot_file=$(find /sys/firmware/efi/efivars -name SecureBoot-* 2>/dev/null)
setup_mode_file=$(find /sys/firmware/efi/efivars -name SetupMode-* 2>/dev/null)
if [ -f "$secure_boot_file" ] && [ -f "$setup_mode_file" ]; then
secure_boot_byte=$(hexdump -v -e '/1 "%d\ "' $secure_boot_file|cut -d' ' -f 5)
setup_mode_byte=$(hexdump -v -e '/1 "%d\ "' $setup_mode_file|cut -d' ' -f 5)
if [ "$secure_boot_byte" = "1" ] && [ "$setup_mode_byte" = "0" ]; then
return 0
fi
fi
return 1
}
#
# prepare_kexec_args <kexec args>
# This function prepares kexec argument.
#
prepare_kexec_args()
{
local kexec_args=$1
local found_elf_args
ARCH=`uname -m`
if [ "$ARCH" == "i686" -o "$ARCH" == "i386" ]
then
need_64bit_headers
if [ $? == 1 ]
then
found_elf_args=`echo $kexec_args | grep elf32-core-headers`
if [ -n "$found_elf_args" ]
then
echo -n "Warning: elf32-core-headers overrides correct elf64 setting"
echo
else
kexec_args="$kexec_args --elf64-core-headers"
fi
else
found_elf_args=`echo $kexec_args | grep elf64-core-headers`
if [ -z "$found_elf_args" ]
then
kexec_args="$kexec_args --elf32-core-headers"
fi
fi
fi
echo $kexec_args
}
check_boot_dir()
{
local kdump_bootdir=$1
#If user specify a boot dir for kdump kernel, let's use it. Otherwise
#check whether it's a atomic host. If yes parse the subdirectory under
#/boot; If not just find it under /boot.
if [ -n "$kdump_bootdir" ]; then
echo "$kdump_bootdir"
return
fi
if ! is_atomic || [ "$(uname -m)" = "s390x" ]; then
kdump_bootdir="/boot"
else
eval $(cat /proc/cmdline| grep "BOOT_IMAGE" | cut -d' ' -f1)
kdump_bootdir="/boot"$(dirname $BOOT_IMAGE)
fi
echo $kdump_bootdir
}
#
# prepare_cmdline <commandline> <commandline remove> <commandline append>
# This function performs a series of edits on the command line.
# Store the final result in global $KDUMP_COMMANDLINE.
prepare_cmdline()
{
local cmdline id
if [ -z "$1" ]; then
cmdline=$(cat /proc/cmdline)
else
cmdline="$1"
fi
# These params should always be removed
cmdline=$(remove_cmdline_param "$cmdline" crashkernel panic_on_warn)
# These params can be removed configurably
cmdline=$(remove_cmdline_param "$cmdline" "$2")
# Always remove "root=X", as we now explicitly generate all kinds
# of dump target mount information including root fs.
#
# We do this before KDUMP_COMMANDLINE_APPEND, if one really cares
# about it(e.g. for debug purpose), then can pass "root=X" using
# KDUMP_COMMANDLINE_APPEND.
cmdline=$(remove_cmdline_param "$cmdline" root)
# With the help of "--hostonly-cmdline", we can avoid some interitage.
cmdline=$(remove_cmdline_param "$cmdline" rd.lvm.lv rd.luks.uuid rd.dm.uuid rd.md.uuid fcoe)
# Remove netroot, rd.iscsi.initiator and iscsi_initiator since
# we get duplicate entries for the same in case iscsi code adds
# it as well.
cmdline=$(remove_cmdline_param "$cmdline" netroot rd.iscsi.initiator iscsi_initiator)
cmdline="${cmdline} $3"
id=$(get_bootcpu_apicid)
if [ ! -z ${id} ] ; then
cmdline=$(append_cmdline "${cmdline}" disable_cpu_apicid ${id})
fi
echo ${cmdline}
}
Mini Shell